search
產品圖片
產品圖片
產品圖片

MITECH MHBS-3000-XYZ Automatic Brinell Hardness Te

Brand:

Mitech

Model:

Measuring range:

8 – 650 HBW

Resolution Accuracy:

Communication storage:

Working time:

Main unit weight:

Dimensions:

760*320*1050mm

Package dimensions:

84*40*120cm

Total weight:

230kg

Product

  • Overview
  • Graphic
  • Technical
  • Configuration
  • Related

Product

  • Overview
  • Graphic
  • Technical
  • Configuration
  • Related
  • Product Overview

    Mitech MHBS-3000-XYZ Automatic Brinell Hardness Tester, based on the mechanical principle of hard alloy indenter pressing into the sample surface to produce indentation, realizing the material hardness measurement by measuring the diameter of the indentation, The use of photoelectric sensor system to high magnification optical measurement, equipped with automatic turret device, high sensitivity touch screen operation interface, can achieve automatic loading and unloading of electronic, automatic indentation marks, microscopic auto focus measurement indentation diameter, GB / ASTM hardness automatic conversion, automatic test report and other functions, easy to operate, high detection efficiency. It can meet the hardness testing requirement for the quality control and qualified assessment of the workpiece sample. It is widely used in metal processing and manufacturing, various metal material’s failure analysis and other fields like colleges and research institutions. It’s to improve the work efficiency, product qualification rate, saving production costs necessary professional precision testing equipment.

    Function & application

    Metal processing industry quality control links

    Universities teaching and demonstration test

    The failure test of metal material

    The material hardness test of scientific research institutions

    Working Principle

    Hardness is not a simple physical quantity, but a reflection of the material elasticity, plasticity, strength and toughness .and hardness test is the most simple mechanical testing method to determine the metal material performance. Also one of the important means to judge the products quality.

    Brinell hardness test: Test force(F) is on the steel ball with certain diameter(D) , pressed on sample surface. After a period of time, cancel the force. The indentation diameter is get by measuring with  micrometer ocular,thus to calculate the average pressure(N/mm2).

    Working Conditions

    Working Temperature18℃28℃;

    Relative Humidity≤65%;

    Clean environment, no vibration

    No corrosive media around.

    Instrument Features

    Widely used in metal processing and manufacturing, various metal material’s failure analysis and other fields like colleges

     and research institutionsand other fields;

    High degree of automation, accurate measurement, suitable for large demand or high precision measurement of high-end

     users.

    Equipped with portable high-definition USB camera, ergonomic design, feel comfortable, delicate and durable.

    Easy to operate, can automatically identify the edge of indentation, automatic removal of burrs to achieve accurate

     indentation measurement, synchronous display.

    With threshold overrun automatic alarm function, apply to the bulk of finished products or semi-finished pieces of 

    paper-by-piece detection.

    Image and the corresponding measurement data files can be set to automatically store, open, store, print, modify, call and

     other operations, generate measurement reports;

    Real-time statistical measurement data, display the maximum, minimum, average, deviation, CP, CPK and so on.

    The automatic turret mechanism can realize the automatic switching function between the objective lens and the indenter

     and improve the detection efficiency.

    Using touch screen display interface, display operation integration, simple and intuitive, the technical requirements of the

     operator is not high;

    Equipped with excellent performance of the carbide indenter, high hardness, wear resistance, good toughness, while high

     temperature, corrosion resistance, to ensure that the instrument measured standard, stable and reliable;

    Equipped with high-speed thermal printer, you can quickly print out the test data;

    According to ASTM_E140, DIN 50150, GBT_1172 and other different standards for hardness conversion;

    Diameter measurement accuracy of up to 0.001mm, meet ASTM E 10, GBT 231, ISO-6506 and other standards;

    Operating Method and Attentions


    Instrument Maintenance

    l Each technical requirement of the instrument has already reached the national standards before leaving factory. But its

     disassembly, transportation or voltage after delivery might cause some data in the instrument changed. So to make the

     electronic component in normal operation to reduce the testing error, you can use test force of 29400N(3000kgf) pressing

     times before starting the instrument to eliminate the instrument deformation.

    l The anti-interference component has been installed in the circuit to ensure the transmission of the loading or unloading

     single of the test force at all levels. At the same time, make sure no strong interference source around when using the

     instrument, and power off the instrument after finished the testing.

    l All the screws and the caps have been fasten tightly before the instrument leaving factory. However, the screw and cap

     may become less crowded because that the screw lever for loading and unloading are rotating all the time. If there is

     irregular noise, when the screw lever rotating, please check and tightened the screw and cap as the below figure shown.

     

    Pulley and cap

    l If there is some slight noise during loading or unloading, it is the loading mechanism making adjustment automatically,

    which is a normal phenomenon.

    l Hardness of the use of a period of one year, two adjacent indentation or indentation center to the edge of the distance of

     not less than 3mm, too close will affect the measured results;

    l The instrument screw level and other movable surface should be lubricated regular.

    l When not in use for a long time, please cover the dust cover to prevent dust into the instrument interior. And

     the hardness block, indenter should be coated with antirust oil to prevent rusting after using.

    l Start using again after long time idling, please make testing after preheating the electrical components.

    l The accuracy of the reading microscope has been adjusted before leaving factory. It is prohibited to disassembly without

     authorization. Otherwise, it will reduce the reading accuracy of the micro eyepiece.

    l The storage and using of the reading microscope should avoid dust, damp and corrosive gas environment;

    l If there is dirt on the surface of the reading microscope lens, please wipe it with soft absorbent cotton or lens paper. If

     there is oil pollution, please wipe it slightly by the absorbent cotton with industrial alcohol or ether.

    l Don’t disassemble the instrument without authorization, maintenance related matter, please contact MITECH after-sale

     service department with 4000600280.

  • The power series 612.5N(62.5kgf)、980N(100kgf)、1225N(125kgf)、1837.5N(187.5kgf)、 2450N(250kgf)、4900N(500kgf)、7350N(750k
    Test force accuracy 0.1% higher than the average Brinell hardness of 1% (1000Kgf above)
    Measuring range 8 – 650 HBW
    Conversion scale GB / automatic
    Brinell scale HBW2.5/62.5、HBW2.5/187.5、HBW5/125、HBW5/250、 HBW5/750、HBW10/100、HBW10/1500、HBW10/3000、 HBW10/250、HBW1
    Testing Force Application Mode Automatic (loading, holding, unloading)
    Indenter objective lens conversion mode Automatic
    Indentation measurement Automatic
    Image focus Automatic or manual
    Turret Automatic or manual
    Camera (pixel) 1.3 million / 3 million
    Indentation measurement Automatic or manual
    Hardness value display Automatic
    display usage LCD touch screen
    Test force holding time 5~60s
    Minimum division 0.001 mm
    Applicable material maximum height 400mm
    Max distance from head to body 250mm
    Test report Automatic
    Voltage AC 220V/50Hz
    Size 760*320*1050mm
    Total Weight 200kg
×

郵箱反饋

如您在和我公司的交往中遇到問題,可通過以下方式和我們取得聯(lián)系!
您也可以撥打我們客戶服務熱線:400-0600-280

*
*

MITECH CO. LTD

TEL :

86-10-58859527
008613810243516

ADD:

E-506, 1# of ShangDi East Road, Haidian District, Beijing, China

Email: 

mvip@mitech-ndt.com

公眾號